3D SPEED is the most popular AIO product on the market world-wide. The reason why is because it works so good and it’s so fast and easy to work with. In fact, it’s the most versatile AIO on the market today. 3D SPEED can be used with any type of machine, any type of pad and is the most effective AIO on the market if you choose to work by hand.
Just one of the reasons 3D SPEED is so popular is due to the proprietary abrasive technology created at 3D’s own manufacturing plant in Santa Clarita, California. Unlike most brands, 3D makes their own abrasive technology in their privately owned manufacturing plant based upon their own research and development by their team of in-house chemists. Everything from the raw materials to the finished product is controlled and manufactured by 3D. It doesn’t get any more real than this.
Beside incredible paint correction and polishing ability, 3D SPEED leaves behind a layer of synthetic paint sealant blended with Montan Wax. This proprietary blend creates a sealant that offers long lasting shine with excellent resistance to high heat climates as well as resisting corrosion from exposure to chemical contamination. This blended sealant also offers excellent gloss, shine, and slickness for reduced marring anytime you wash, dry or in any way wipe the finish.
What does it do? - 3D SPEED does three paint correction processes in a single step,
1: Compound - 3D’s unique and proprietary abrasive technology removes defects like swirls, scratches, water spots and oxidation WITHOUT inflicting micro-marring at the same time.
2: Polish – 3D’s own polishing agents pick up where the compound leaves off to create a clear, high gloss shine with maximum D.O.I or distinction of image.
3: Protection – 3D SPEED seals the surface to lock-in the achieved results while locking out all the corrosive substances found in the environment that act to attack and corrode the paint.
While it can be a tick difficult to wrap your brain around how a single product can remove defects while at the same time leaving protection behind – using this product just ONE time will make you a believer.
When do you use it? - Anytime you want to restore a better-than-new factory shine to your car’s paint. And the good news is you can use this product on virtually any type of paint and also gelcoat, plastic surfaces, and even clear bras or PPF or Paint Protection Film as is known in the detailing industry. You can even use this product on glass to remove light water spotting, road film and drizzle stains. 3D SPEED is as close to a miracle product you can find it’s that good.
By Hand
Step 1: Using a clean, soft microfiber or foam applicator, apply a quarter size drop of 3D SPEED onto the applicator and then using an overlapping circular motion, spread the 3D SPEED out over a section of paint about the size of a microfiber towel or 20” x 20”.
Step 2: Next gently massage the 3D SPEED over the surface for about one minute continuing with the overlapping circular motion.
Step 3: Move onto a new section of paint and repeat the above process until an entire panel has been worked with 3D SPEED.
Step 4: After the wax has dried to a haze, normally around 15 to 20 minutes, remove the wax beginning with the panel where you first applied the wax and then following your path-of-travel, gently and carefully remove the wax using a clean, soft microfiber towels. Turn the towel over or fold to a clean side often. For best results, switch to a clean, dry microfiber towel often.
By orbital polisher
Step 1: Apply 4-5 nickel sized drops of 3D SPEED to the face of the pad.
Step 2: Using a slow to medium speed, spread 3D SPEED out over a section of paint no larger than 2’x2’.
Step 3: Turn polisher to high speed and begin working the 3D SPEED over the panel using an overlapping, crosshatch pattern for 2-4 minutes.
Step 4: Move onto a new section of paint and repeat the above process until an entire panel has been worked with 3D SPEED.
Step 5: After the wax has dried to a haze, normally around 15 to 20 minutes, remove the wax beginning with the panel where you first applied the wax and then following your path-of-travel, gently and carefully remove the wax using a clean, soft microfiber towels. Turn the towel over or fold to a clean side often. For best results, switch to a clean, dry microfiber towel often.
By rotary polisher
Step 1: Apply a circle of 3D SPEED around the middle of the face of the pad.
Step 2: Using a slow to medium speed, spread 3D SPEED out over a section of paint no larger than 2’x2’.
Step 3: Using a low to medium speed, begin working the 3D SPEED over the panel using an overlapping, crosshatch pattern for 2-4 minutes.
Step 4: Move onto a new section of paint and repeat the above process until an entire panel has been worked with 3D SPEED.
Step 5: After the wax has dried to a haze, normally around 15 to 20 minutes, remove the wax beginning with the panel where you first applied the wax and then following your path-of-travel, gently and carefully remove the wax using a clean, soft microfiber towels. Turn the towel over or fold to a clean side often. For best results, switch to a clean, dry microfiber towel often.
