Shopping cart

Cart id:

You have no items in your shopping cart.

Have a cart id?
Loading...

Sub-Total

$0.00

Shipping and taxes calculated at checkout.

or

Auto Magic Power Foam Cleaner - 18 oz Aerosol

Part #:
61-00
SKU:
AM-61-00
Availability
Fargo - In Stock
Sioux Falls - In Stock
UPC: 318025006110

Additional details

  • Power Foam contains ammonia and special foaming agents to instantly loosen and remove grease and dirt from most surfaces
  • Excellent for use on velour, carpet, fabric, vinyl and plastic surfaces
  • VOC Compliant

Auto Magic Power Foam - 61-S is a highly effective, professional-grade foaming ammonia based cleaner designed to tackle a wide range of automotive cleaning tasks. Its powerful formula easily lifts and removes dirt, grease, and grime from various surfaces, including vinyl, plastic, upholstery, velour, carpets, and even engines. The high-foaming action ensures deep cleaning and leaves surfaces looking fresh and clean without the need for heavy scrubbing. VOC compliant.

Primary Uses:

  • Cleaning automotive interior surfaces such as vinyl, plastic, upholstery, and carpets
  • Degreasing and cleaning under-the-hood components and engine bays

Alternate Uses:

  • Cleaning surfaces in boats, RVs, and other transportation vehicles
  • Use on home and office surfaces, including carpets, upholstery, and plastic materials

Product Longevity:

  • The cleaning effects are immediate upon application, and the product should be used as needed to maintain clean and attractive surfaces

Directions for Use:

  1. If cleaning interior surfaces, vacuum the area thoroughly to remove loose dirt and debris
  2. Shake the well before use
  3. Test the product on an inconspicuous area to ensure compatibility and desired results
  4. Hold the can approximately 6"-8" away from the surface and spray a thin, even layer of foam
  5. Allow the foam to dwell for 1-2 minutes, letting it penetrate and break down the dirt and grime
  6. Use a soft-bristle brush or microfiber cloth to gently agitate the foam into the surface, working on small areas at a time
  7. Wipe or blot the treated area with a clean, dry microfiber cloth to remove excess foam and dirt
  8. If cleaning engines or under-the-hood components, rinse the area thoroughly with water after agitation to remove foam residue and loosened contaminants
  9. Reapply if necessary.
  10. Allow the surface to dry completely, preferably in a well-ventilated area

Finish and Residues:

Auto Magic Power Foam - 61-S leaves surfaces clean and residue-free, with no sticky or oily residues that could attract dirt or dust

Best Practices:

  • Shake the well before use
  • Avoid using the product on hot surfaces or under direct sunlight to prevent premature drying
  • Do not use on surfaces that are incompatible with water, such as certain electronics or sensitive components

Dilution Ratios:

  • Auto Magic Power Foam - 61-S comes in an aerosol can and does not require dilution. Use the product directly as instructed

SCENT: Ammonia

Safety Information:

  • Keep out of reach of children and pets.
  • Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water and seek medical advice if necessary
  • Do not ingest. If swallowed, do not induce vomiting and seek medical advice immediately
  • Store in a cool, dry place away from direct sunlight and heat sources
  • Use in a well-ventilated area and avoid inhaling spray mist
  • Use appropriate personal protective equipment (gloves, eye protection) during application

Brand Auto Magic
Length 2 inch(es)
Width 2 inch(es)
Height 8 inch(es)
Weight 2 lb(s)
UPC 318025006110

WARNING: Some products may contain chemicals such as DEHP, which can cause cancer, birth defects or other reproductive harm. For more info go to www.p65warnings.ca.gov