This DECKED truck bed organizer fits a Toyota Tacoma pickup truck with a bed Length of 5'1" manufactured from 2019 to current. It takes a short midsize bed DECKED system. Components not included. NOTE: This vehicle requires drilling 8 holes into the truck bed for installation. For more information call, email or live chat with our customer service team. NOTE: Because the short midsize DECKED system is 56", there will be about 3.9" of empty space between the tailgate end of the DECKED system and the tailgate. DECKED Drawers require 4" to be opened, but the first 5 1/2" of the Drawer are taken up by the handle cavity and Drawer taper. Thus, it is nearly impossible to remove anything from the Drawers with the tailgate closed. PLEASE NOTE: Some Tacoma/Tundra's come with aftermarket bed lighting kits. Light modification of your system may be required if you have this option. A small sliver of the deck may need to be cut away or shaved down (using a keyhole saw or surform) to create space for your lights. Access to the outlet and both storage compartments will be compromised. You may remove the storage compartment doors for limited access. Use will be compromised. NOTE: you must do this before you install the DECKED system into your Tacoma. The power outlet can still be used if you insert a flat head pigtail extension cord BEFORE you install the decks. Make sure to have the outlet capped to keep water out. A low profile pigtail such as one like this will work. See images below. One can install a weather proof cover over female end of the pigtail when not in use.
