PREP SOLUTION FOR IDEAL PAINT BONDING
Diamond Body Prep is the ideal paint surface cleaner that will remove all polish residues, waxes and sealants to prep for optimal bonding of nanodiamond protective coatings.
What You'll Need:
- 1 Microfiber Towel
- 1 Applicator Pad or Protective Gloves
Directions for Use:
- Work out of direct sunlight on cooled glass
- Spray DIAMOND GLASS PREP onto the glass surface.
- Wipe the surface clean with a microfiber towel.
- Dry the surface with the dry side of the towel.
Best Practices:
- Apply in temperatures between 10-30°C, 50-90°F.
- Apply in a closed, well ventilated indoor area with air humidity not exceeding 70%.
- Wear protective gloves.
- Use fresh applicators & microfiber towels for application of additional layers (do not use previously used towels).
- If applying in high heat or humidity lower time between application and removal. Test over a small area to determine appropriate time to let the coating bond to the surface.Apply to body, headlights, rubber, and metal trim.As the coating bonds to the surface a haze will appear. This indicates coating is ready to remove. If product dries on the surface or is difficult to remove, re-wet the area with more product and immediately buff off. If a second layer is desired, allow to cure for 1 hour before application.
