Auto Magic PC1 Extra Cut Rubbing Compound is a high-quality, fast-acting compound designed to remove heavy oxidation, scratches, swirl marks, and other paint imperfections from vehicle surfaces. Formulated with a balanced blend of abrasive particles, lubricants, and conditioners, this compound provides outstanding cutting power while minimizing damage to the clear coat. Auto Magic PC1 is an excellent choice for professional detailers and car enthusiasts looking for a reliable and efficient way to restore a vehicle's paintwork. Fast removal of 1500 grit and finer sand scratches. Professional detailers will especially appreciate the outstanding cut, brilliant mirror-like gloss, low dust, and easy clean up of the PC-1 Rubbing Compound. This is a low dusting product VOC compliant and body shop safe.
Primary Uses:
- Removing heavy oxidation
- Eliminating scratches and swirl marks
- Restoring paintwork and improving gloss
- For compounding clear coat, single stage, acrylic, lacquers, enamels, gel coats, as well as powder-coated paints
Alternate Uses:
- Excellent on RVs, boats, motorcycles, ATVs, and other painted surfaces.
- Preparing vehicle surfaces for the application of waxes or sealants
- Refining the finish after wet sanding
Auto Magic PC1 Extra Cut Rubbing Compound offers several advantages over other rubbing compounds:
- Fast and efficient removal of heavy paint defects
- Balanced formula that minimizes damage to clear coats
- Easy-to-use and easy-to-remove formula
- Suitable for both professional detailers and DIY enthusiasts
- Compatible with both machine and hand application
Longevity:
Auto Magic PC1 Extra Cut Rubbing Compound provides immediate results upon application. The longevity of the product's effects depends on proper application, the type and severity of paint imperfections, and subsequent care and maintenance of the vehicle's paintwork.
Directions for Use:
- Shake the Auto Magic PC1 Extra Cut Rubbing Compound well before use
- Apply a thin line of product to a clean foam or wool pad or a microfiber applicator for hand application
- For machine application, set the speed of the polisher to a low or medium setting
- Work the compound into the paint surface using overlapping, circular motions, applying moderate pressure
- Keep the pad “wet” by spraying a mist of #502050 Lubri Shine® onto the pad or surface
- Continue working the compound until the desired level of defect removal is achieved
- Remove any excess compound residue using a clean, soft microfiber towel
- Inspect the area and repeat the process if necessary
- Follow up with a lighter polish, glaze, or wax to further refine the finish and protect the paintwork
Finish and Residues:
- Auto Magic PC1 Extra Cut Rubbing Compound leaves a clean and glossy finish on treated surfaces when used correctly. Any residue can be easily removed using a clean microfiber towel
Best Practices:
- Always follow PC1 with Auto Magic® PC2 or PC3, and finish with our 10QT Paint Sealant or Wax for optional added gloss and protection.
- Always work on a cool, dry surface and in a shaded area.
- Use appropriate pads for machine application, such as foam or wool pads.
- Test the product on an inconspicuous area before full application.
- Follow up with a lighter polish or glaze to refine the finish further.
Dilution Ratios:
- Auto Magic PC1 Extra Cut Rubbing Compound is a ready-to-use product and does not require dilution.
SCENT: Cherry
ABRASIVENESS: 9.5 out of 10 (10 is highest amount of abrasive)
Safety Information:
- Keep out of reach of children
- Wear appropriate personal protective equipment, such as gloves and safety glasses, during use
- Avoid contact with eyes and skin. In case of contact, rinse thoroughly with water
- If ingested, do not induce vomiting. Seek medical attention immediately
- Use in a well-ventilated area
- Store in a cool, dry place away from direct sunlight and heat sources
