P&S Brake Buster Total Wheel Cleaner - Labeled Spray Bottle - 32oz

Properly labeled secondary container spray bottles are a must for every shop. OSHA requires that every product dispensed through a secondary container bottle contain the following information:

1. The identity of the chemical and appropriate hazard warnings must be shown on the label
2. The hazard warning must provide users with an immediate understanding of the primary health and/or physical hazard(s) of the hazardous chemical through the use of words, pictures, symbols, or any combination of these elements
3. The name and address of the manufacturer, importer or other responsible party must be included on the label and
4. The hazard label message must be legible, permanently displayed and written in English. P&S labeled bottles make meeting these requirements EZ by including all the above information.

P&S Brake Buster Total Wheel Cleaner is a highly effective wheel cleaning solution formulated to tackle the toughest grime found on wheels. It's specifically designed to safely remove accumulated brake dust, oil, dirt, stains, and light corrosion without harming the delicate surfaces of premium quality wheels

Alternate Uses:

• While Brake Buster is primarily intended for cleaning wheels, its gentle yet effective formula makes it suitable for use on other automotive surfaces where grime and brake dust may accumulate, such as lower body panels and behind the wheel wells

Advantages Over Other Products:

• Brake Buster stands out in the market due to its unique gel formula that adheres to the wheel surface for a more prolonged cleaning action, allowing it to penetrate deeply into dirt deposits. Additionally, it is acid-free and includes corrosion inhibitors that not only clean but also provide a layer of protection to prevent future corrosion. Its foaming action ensures complete coverage of the wheel for thorough cleaning

Longevity After Application:

• Brake Buster leaves behind a thin layer of protection that helps to safeguard the wheels against future corrosion. The durability of this protective layer varies with driving conditions, wheel material, and exposure to the elements. Regular cleaning with Brake Buster will maintain this protective benefit over time

Step-by-Step Usage Guide:

1. Cool Down: Ensure the wheels are cool to the touch to prevent the cleaner from drying too quickly
2. Apply Cleaner: Spray a generous amount of Brake Buster onto the wheel and tire surfaces
3. Dwelling Time: Allow the cleaner to sit and dwell for at least 1 minute to penetrate and loosen the dirt
4. Scrub if Needed: For stubborn grime, use a wheel brush to gently scrub the surfaces
5. Rinse Thoroughly: Rinse the wheel and tire with a pressure washer or a high-pressure hose for the best results

Finish and Residues:

• After using Brake Buster and rinsing thoroughly, your wheels should have a spotless finish with no residue or streaking. The cleaner's unique formula ensures it rinses away cleanly, leaving a pristine surface.

Best Practices:

• Always test the cleaner on a small, inconspicuous area first, especially for after-market or non-OEM coated wheels
• Avoid using the cleaner in direct sunlight or on hot wheels
• Use dedicated wheel cleaning tools to prevent cross-contamination with paintwork tools
• Wear appropriate personal protective equipment, such as gloves and eye protection, during use

Dilution Ratios:

• Brake Buster is ready to use and does not require dilution

Safety Information:

• Store the product in a cool, dry place out of direct sunlight
• Keep out of reach of children and pets
• Avoid prolonged skin contact and inhalation of spray mist
• Dispose of any empty containers or residue in accordance with local regulations