P&S Shine All Performance Dressing

Shine All truly outperforms competitive water based tire dressings. This exceptional product was built specifically for use as a high performance tire dressing. Perfect for use in carwashes, detail shops, rental fleets, etc. Although formulated for exterior use; Shine All may also be used as an interior dressing to condition, soften, preserve and protect all leather, rubber, vinyl and leather surfaces. Shine All produces a glossy finish.

Primary Uses:

• Restores original beauty to and protects vinyl upholstery and trim, dashboards, air vents, tires, rubber moldings, vinyl tops, hoses and more
• Providing a high-gloss, water-resistant finish on tires, trim, molding, and dashboard

Alternate Uses:

• Can be used on engine compartments and undercarriages for added shine and protection

P&S Shine All Performance Dressing offers several advantages over competing products:

• Silicone-based formula for added durability and water resistance
• Will not harm plastic or vinyl dashes
• Safe for engines
• Versatile application on a variety of surfaces, both exterior and interior
• High-gloss finish for an impressive appearance
• Long-lasting protection to keep surfaces looking their best

How Long Will the Product Last After Application:

• The longevity of the finish provided by P&S Shine All Performance Dressing depends on factors such as weather conditions, exposure to environmental elements, and vehicle usage. Regular maintenance and reapplication are recommended for maintaining optimal appearance and protection

Directions for Use:

1. Ensure the surface is clean, dry, and cool to the touch
2. Dilute P&S Shine All Performance Dressing according to the desired level of shine (see dilution ratios below)
3. Shake the diluted solution well before use
   • For a high gloss finish, spray directly onto the surface, then allow to dry
   • For a satin finish (less gloss), after application, wipe evenly with a clean cloth
   • For economy usage, Shine All Perf. Dressing can be diluted up to 1:4 with water
   • For engines, spray product directly over entire engine, then allow to dry naturally

Finish and Residues:

P&S Shine All Performance Dressing leaves a high-gloss, water-resistant finish with no visible residues, enhancing the appearance of your vehicle's interior and exterior rubber, plastic, and vinyl surfaces

Best Practices:

• DO NOT apply to brake/accelerator pedals
• Product can be applied when the engine is still wet; just after the wash and rinse
• Be sure to let your tires dry at least 5 minutes before driving. This will help to avoid product “slinging” onto body panels.
• Test the product on an inconspicuous area before applying it to the entire vehicle
• Regularly maintain and reapply the product to maintain optimal appearance and protection
• Avoid applying the product on surfaces that may become slippery, such as pedals, steering wheels, and floor mats

Dilution Ratios:

• High gloss and Exterior use: Ready to Use
• High to Medium Gloss on tires, exterior moldings: Dilute 1:4 (1 part product with 4 parts water)
• Medium to Low Gloss on exterior & interiors: Dilute 1:6 (1 part product with 6 parts water)
• Low Gloss on Engines & Interiors: Dilute 1:8 (1 part product with 8 parts water)

SCENT: Lemon

Safety Information:

• Always read and follow the label instructions and safety information
• Keep out of reach of children and pets
• Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water and seek medical advice if necessary
• Use in a well-ventilated area
• Store in a cool, dry place away from heat sources and direct sunlight
• Dispose of the container in accordance with local regulations