P&S Bead Maker - Labeled Spray Bottle - 32oz

Properly labeled secondary container spray bottles are a must for every shop. OSHA requires that every product dispensed through a secondary container bottle contain the following information:

1. The identity of the chemical and appropriate hazard warnings must be shown on the label
2. The hazard warning must provide users with an immediate understanding of the primary health and/or physical hazard(s) of the hazardous chemical through the use of words, pictures, symbols, or any combination of these elements
3. The name and address of the manufacturer, importer or other responsible party must be included on the label and
4. The hazard label message must be legible, permanently displayed and written in English. P&S labeled bottles make meeting these requirements EZ by including all the above information.

P&S Bead Maker Paint Protectant is a professional-grade detailing product designed to enhance the paint's shine and protect the vehicle’s exterior from the elements. It is primarily used as a finishing sealant that leaves behind a glossy shine and a highly hydrophobic layer, repelling water and contaminants.

Alternate Uses:

• Aside from its primary use on vehicle paint, Bead Maker can also be safely applied to other exterior surfaces including rubber, plastic, metal, and glass. This makes it a versatile product suitable for a wide range of applications, from cars and RVs to boats and airplanes.

Advantages Over Other Products:

• Bead Maker differentiates itself with its ease of use, effectiveness, and versatility. It can be applied on both wet and dry surfaces, serving as a drying aid or a stand-alone paint protectant. The unique formula provides not just gloss and water repellency but also UV protection, thanks to a combination of UV filters and stabilizers. Unlike many other sealants, Bead Maker's binding polymer monomer technology creates a lasting finish without the need for frequent reapplication.

Longevity of Product:

• Once applied, Bead Maker's protection and shine can last for several weeks, or longer, depending on environmental conditions and the level of vehicle maintenance. The cross-linking polymerization process provides a durable layer, while the surface's hydrophobic properties keep it cleaner for extended periods.

Step-by-Step Usage Guide:

1. Surface Preparation:
   • Ensure the vehicle is clean and cool to the touch.
   • For best results, the paint should be free of contaminants.
     • Clay the vehicle if necessary
2. Application on Wet Surface (As a Drying Aid):
   • After washing the vehicle, leave the surface wet
   • Spray Bead Maker evenly across the surface
   • Using a clean microfiber towel, spread the product while drying the vehicle
3. Application on Dry Surface:
   • On a dry and clean surface, spray Bead Maker evenly
   • Spread and wipe with a clean microfiber towel to a uniform finish
4. Final Wipe:
   • Flip the towel or use a second clean microfiber towel for the final wipe and buff off to a high gloss shine

Finish and Residues:

• Bead Maker Paint Protectant leaves a smooth, glossy finish without any greasy or hazy residues. Surfaces will exhibit enhanced color depth and reflections, with a slick feel to the touch

Best Practices:

• Apply in a shaded area or in a cool garage to avoid premature drying
• Use multiple clean microfiber towels to prevent streaks
• Allow the protectant to cure for at least two hours for optimal protection and water repellency

Dilution Ratios:

• Bead Maker is ready to use and does not require dilution.

Safety Information:

• Keep the product away from heat or open flame
• If using indoors, ensure proper ventilation
• Avoid contact with eyes and prolonged contact with skin
• Store in a cool, dry place, out of direct sunlight and reach of children