Your iDatalink Weblink HUB is the next generation Weblink & KLON Interface programmer. It features a built-in key reader for advanced KLON functionality. It flashes all Weblink-compatible products and works with the Weblink Desktop application via USB on both PC and Mac operating systems as well as the Weblink Mobile application via Bluetooth on both Apple and Android mobile devices. It also enables a streamlined workflow by vehicle brand and is fully updatable for future products and services.
1) INSTALL THE WEBLINK DESKTOP OR WEBLINK MOBILE APPLICATION
•For Weblink Desktop:
Go to www.weblinkupdater.com/weblinkdesktop, select your software version (Mac or PC) and follow the installation steps. Be sure to review the system requirements before installing.
•For Weblink Mobile:
Go to the Google Play Store or to the Apple App Store and install the Weblink Mobile app.
2) REGISTER A WEBLINK ACCOUNT
Once installed, complete the Weblink registration process and log into Weblink.
3) CONNECT THE WEBLINK HUB TO YOUR COMPUTER OR MOBILE DEVICE
•On a computer:
a- Plug your HUB to a power source using the included AC power adapter if your are at a desk or the included OBD2 power adapter if you are in a vehicle.
b- Use the included USB cable to connect your Weblink HUB to your computer.
c- Connect a Weblink-compatible module to your HUB using the provided Weblink serial cable.
•On a mobile device:
a- Plug your HUB to the vehicle using the included OBD2 power adapter.
b- Connect a Weblink-compatible module to your HUB using the provided Weblink serial cable.
4) WEBLINK PROGRAMMING
Follow the programming steps until your module is flashed, then download your install guide and owner’s manual if applicable.
5) COMPLETE VEHICLE-SPECIFIC INSTALLATION
Follow the steps in your install guide and complete the installation. ADS recommends having your iDatalink devices installed by a certified technician. Additional accessories may be required and sold separately.
